Contact Us
Bars
Contact

Ride on Roller Training (CPCS A31)

Course introduction

Ride on Roller Training Course – BAM Construction Training’s CPCS A31 Ride on Roller training course is designed to provide novice and intermediate operators with sufficient ride on roller training which will enable them to competently and safely carry out the role as a roller operator and pass the CPCS theory/practical assessments.

Experienced

Course time 2 days

Foundation

Course time 3 days

Experienced

  • Course time: 2 day
  • Day 1: Theory training
  • Day 2: Theory & practical tests

£625+VAT

Foundation

  • Course time: 3 days
  • Day 1: Theory training
  • Day 2: Practical training day
  • Day 3: Theory & practical tests

£795+VAT

Combined Course: A09 Forward Tipping Dumper/ A31 Ride on

  • Course time: 4 day
  • Day 1: Theory training
  • Day 2-3: Practical training day
  • Day 4: Theory & practical tests

£995+VAT

Eligibility Criteria

Before attending this course, candidates must pass the CITB Health and Safety Test for Operatives (OPS) within the past 2 years. We can accommodate this test at our centre for a fee of £60+VAT.

Course Learning Outcomes

  • Describe the nature of the sector of industry and their role and responsibilities as a plant operator.
  • Name & explain the purpose of principal components, the basic construction, controls & terminology.
  • Conform with manufacturer requirements and relevant regulations/legislation. Undertake all pre-use checks.
  • Manoeuvre in confined spaces with and without loads. Travel over rough terrain & inclines.
  • Configure & set for compaction duties. Explain actions required for hazards.
  • Compact loose granular materials to specification. Compact in straight lines & around radii.
  • Compact supported and unsupported edges. Explain the principles & techniques of good compaction.
  • Carry out shut down and securing procedures. Explain the procedures for transportation.

We have an average 2022 CPCS pass rate of

92%

Pass Rate

Activity Instructions

Complete all manufacturer’ pre-start and running checks and prepare the excavator for travel

Drive up and down a gradient.

Drive on uneven ground.

Position the vehicle, prepare and set the crane and load for each lift.

Prepare an exclusion zone & setup roller for the relevant work.

Compact the straight runs. Several objects must be placed on one of the runs.

Compact the radius.

Park the ride-on-roller and carry out shut-down and securing procedures.

Enquire Today

Get in touch with us today to find the right course for you. Our team are on-hand and ready to support you with your construction training requirements.

Enquire Now
Our Clients Include

Our Testimonials

Hear from our clients. Check out our testimonials here!

The facilities were excellent and training was top quality. I was made to feel comfortable and everything was explained very well. Many thanks.
I really enjoyed the whole experience from start to finish. I had plenty of seat time on the excavator. Trainer and tester were great couldn't ask for anything more from them.
Fantastic course. Matt and Danny both had great knowledge and fantastic communication skills with us. All the guys left BAM with a high level of skill and knowledge and more importantly very safe working practices on the machines.
Enjoyed the course. Trainers were helpful, instructive and patient. There's a lot to take in but they go at a steady pace without overwhelming you with information. Equipment was in very good condition.
Found the course challenging but enjoyable. Nick had plenty of experience to guide us in the right direction. Great use of models and tools to make it understandable. Facilities were spot on and everyone was friendly and welcoming.
I have done a lot of CPCS training over years and BAM Construction Training are by far the best! Everything from the trainers, office personnel and facilities is first class. I would highly recommend them.
CSCS, CPCS, NPORS, NVQs & more. Speak to a member of our team today.
Enquire
Wokingham - Head Office

Unit 4 Warren Farm, Forest Road, Wokingham, Berkshire, RG40 5QY

Bracknell
Ashley Farm, Bottle Lane, Bracknell, Berkshire, RG42 5RY
Youtube Instagram Facebook Linkedin Twitter

Courses

Company

Clients

Resources

© BAM Construction Training Ltd 2022 • Company No: 08605885 • Privacy Policy • T&Cs • Website by e-innovate

Enquire using the form below. Please keep in mind that the more available dates you provide us with, the more likely we are able to fit you onto a course. We do not run courses on Sunday.

Enquire Now